pH Scale

Explore pH, pOH and ion concentrations for strong and weak acids and bases

Beginner
012345678910111213141234567891011121314151617more acidicmore basicpH 2.88

In the beaker(a sample of 24 dissolved units; tint = universal indicator)

0 of 24 CH₃COOH units ionizedH₃O⁺CH₃COO⁻CH₃COOH

Fewer than 1 in 24 units is ionized (1.3%), so none show as ions here.

0.100 M CH₃COOH

pH
2.875
pOH
11.125(pH + pOH = 14.00)
[H₃O⁺]
1.33 × 10⁻³ M
[OH⁻]
7.50 × 10⁻¹² M
[H₃O⁺][OH⁻]
1.00 × 10⁻¹⁴(Kw = 1.0 × 10⁻¹⁴)
Percent ionized
1.33%
pKa
4.74

Where the ions come from

H₃O⁺ from water
7.50 × 10⁻¹² M
H₃O⁺ from the acid
1.33 × 10⁻³ M
Simple estimate √(KC)
pH 2.87

The simple estimate agrees with the exact charge-balance result to within 0.05 pH units here.

What pH measures

Acidity in water comes from hydronium ions, H₃O⁺ (often written H⁺). Their concentration ranges over many powers of ten, from about 1 M in strong acid to 10⁻¹⁴ M in strong base, so chemists use a logarithm: pH = −log[H₃O⁺]. Below 7 is acidic, 7 is neutral and above 7 is basic, at 25 °C.

A strong acid gives up all of its protons, so 0.010 M HCl has [H₃O⁺] = 0.010 M and pH 2. A weak acid only partly ionizes: HA + H₂O ⇌ H₃O⁺ + A⁻, with the extent set by Ka. Bases work the same way with OH⁻, pOH and Kb.

The visualizer does not use the usual shortcuts. It solves the full charge balance, which includes the H₃O⁺ and OH⁻ that water makes by itself. That is why a very dilute acid approaches pH 7 from below instead of crossing into basic values, and why a weak acid at low concentration is almost completely ionized.

A logarithmic scale

pH = −log[H₃O⁺]. Each step of one pH unit is a tenfold change in hydronium concentration, so pH 3 is 1000 times more acidic than pH 6.

Water ionizes too

Pure water contains 1.0 × 10⁻⁷ M each of H₃O⁺ and OH⁻ at 25 °C. Their product Kw = 1.0 × 10⁻¹⁴ holds in every aqueous solution.

Strong means fully ionized

HCl, HNO₃, NaOH and KOH ionize completely. Strength is about how much ionizes, not about how concentrated the solution is.

Weak means partly ionized

Acetic acid and ammonia set up an equilibrium. Ka or Kb tells you how far it goes, and the percent ionized rises as the solution is diluted.

Key formulas

pH, pOH and water

pH = −log[H₃O⁺],  pOH = −log[OH⁻],  [H₃O⁺][OH⁻] = Kw,  pH + pOH = 14.00

Kw
ion product of water, 1.0 × 10⁻¹⁴ at 25 °C

Weak acid equilibrium

Ka = [H₃O⁺][A⁻] / [HA];  if x ≪ C: [H₃O⁺] ≈ √(Ka × C)

C
total (analytical) acid concentration

Exact charge balance (what the visualizer solves)

weak acid: [H₃O⁺] = [A⁻] + Kw/[H₃O⁺];  weak base: [H₃O⁺] + [BH⁺] = Kw/[H₃O⁺]

[A⁻]
C × Ka / (Ka + [H₃O⁺])
[BH⁺]
C × [H₃O⁺] / ([H₃O⁺] + Kw/Kb)

Percent ionization

% ionized = [A⁻] / C × 100

Weak acids and bases in the visualizer

Values at 25 °C
CompoundConstantpKa or pKb
Acetic acid, CH₃COOHKa = 1.8 × 10⁻⁵4.74
Formic acid, HCOOHKa = 1.8 × 10⁻⁴3.74
Hydrofluoric acid, HFKa = 6.8 × 10⁻⁴3.17
Hypochlorous acid, HOClKa = 3.0 × 10⁻⁸7.52
Hydrocyanic acid, HCNKa = 4.9 × 10⁻¹⁰9.31
Ammonia, NH₃Kb = 1.8 × 10⁻⁵4.74 (pKb)
Methylamine, CH₃NH₂Kb = 4.4 × 10⁻⁴3.36 (pKb)
Pyridine, C₅H₅NKb = 1.7 × 10⁻⁹8.77 (pKb)

How to use this visualizer

  1. 1
    Choose strong acid, weak acid, strong base or weak base, then pick a compound.
  2. 2
    Drag the concentration slider. It is logarithmic, from 10⁻⁸ M to 1 M, and the marker under the pH bar moves as you go.
  3. 3
    For a weak acid or base, drag the Ka (or Kb) slider to see how strength changes the pH at a fixed concentration.
  4. 4
    Watch the beaker: each pair of separate ions is one ionized unit. A strong acid splits completely; a weak acid keeps most of its molecules intact.
  5. 5
    Compare the exact pH with the simple estimate in the side panel. Try 10⁻⁸ M HCl, or very dilute acetic acid, to see where the shortcut fails.
  6. 6
    Hover over (or tab to) an everyday substance to find it on the scale.

Common misconception

Strong and concentrated are different ideas. 10⁻⁵ M HCl is strong but very dilute (pH 5.00), while 1 M acetic acid is weak but concentrated (pH 2.37). And diluting an acid never makes it basic: 10⁻⁸ M HCl has pH 6.98, not 8, because water itself supplies about 10⁻⁷ M H₃O⁺.

Practice problems

Problem 1: Vinegar-strength acetic acid

Find the pH and percent ionization of 0.10 M acetic acid (Ka = 1.8 × 10⁻⁵).
Show solution

CH₃COOH + H₂O ⇌ H₃O⁺ + CH₃COO⁻, with x = [H₃O⁺] = [CH₃COO⁻]

x² / (0.10 − x) = 1.8 × 10⁻⁵

x² + 1.8 × 10⁻⁵ x − 1.8 × 10⁻⁶ = 0, so x = 1.33 × 10⁻³ M

(The shortcut √(1.8 × 10⁻⁶) = 1.34 × 10⁻³ M is close, because only about 1% ionizes.)

pH = −log(1.33 × 10⁻³) = 2.88;  % ionized = 1.33 × 10⁻³ / 0.10 × 100 = 1.33%

pH ≈ 2.88, about 1.3% ionized

Problem 2: A very dilute strong acid

What is the pH of 1.0 × 10⁻⁸ M HCl? Explain why the answer is not 8.00.
Show solution

HCl gives 1.0 × 10⁻⁸ M Cl⁻, and water also ionizes. Charge balance: [H₃O⁺] = [Cl⁻] + [OH⁻]

With [OH⁻] = Kw/[H₃O⁺]: h² − (1.0 × 10⁻⁸)h − 1.0 × 10⁻¹⁴ = 0

h = (1.0 × 10⁻⁸ + √(1.0 × 10⁻¹⁶ + 4.0 × 10⁻¹⁴)) / 2 = (1.0 × 10⁻⁸ + 2.0025 × 10⁻⁷) / 2 = 1.05 × 10⁻⁷ M

pH ≈ 6.98. −log(10⁻⁸) = 8 would ignore water, which already supplies about 10⁻⁷ M H₃O⁺; adding any acid can only lower the pH below 7.

Related topics

Discussion

Questions, ideas or a different approach? Join the conversation.